Equipment List
From a single Swiss automatic screw machine in 2007, the PTJ inventory of precision screw machining equipment has grown to become the extensive collection listed below. We think of it as a library rather than an inventory because, like the books in a library, they reach their full potential only in the hands of the knowledgeable and dedicated PTJ people who put them to use.
To ask about a specific capability or machine-related specification, contact us for full particulars from a PTJ customer service representative.
COMPUTERIZED NUMERICAL CONTROL RQUIPMENT
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| 850 CNC Milling True 4th-Axis(12 sets) | Mitsubishi | MB850 | 800*600*500,40 Taper |
| 770 CNC Engraving(3 sets) | Mitsubishi | MB770 | 800*600*500,50 Taper |
| T5CNC Milling Machine(11 sets) | Mitsubishi | NVT5 | 1200*800*600,50 Taper |
| 4500 Big CNC Milling(2 sets) | Taiwan | 4500H | 10000*1000*600,50 Taper |
| 2500 Big CNC Milling(5 sets) | Taiwan | NV2500 | 5000*800*500 |
| 430 CNC Engraving(8 sets) | Mitsubishi | FA 430 | 500*300*300,40 Taper |
| 550 CNC Engraving with 4th Axis(4 sets) | Mitsubishi | CMX550 | 600*400*300,40 Taper |
| 1166 CNC Milling Machine(4 sets) | Taiwan | VMC1166 | 22‘’lx16‘’D‘’,40 Taper |
| 855 CNC Milling Machine(5 sets) | Taiwan | NV855 | 800*600*500,50 Taper |
| 650 CNC Milling Machine(4 sets) | Taiwan | EMC650 | 600*400*300,40 Taper |
| 650 CNC Milling and true 4th-Axis(3 sets) | Taiwan | MB650 | 600*400*300,40 Taper |
| CNC Turning Machine Center(6 sets) | Hitachi | 40G- 15‘’ | Up to 24‘’Swing,43‘’ Length 4 1/ 2‘’Bar Capacity |
| 46 Taiwan CNC Lathe(7 sets) and 46 Switzerland lathe (5 sets) | Switzerland | Diameter is 46 | 46’,40 Taper |
| 36 Taiwan CNC Lathe(7 sets) and 20 Japan Lathe(5 sets) | Japan | Diameter is 36 | 36’,40 Taper |
| 25 Automatic lathe(20 sets) | Taiwan | MB25 | 25,40 Taper |
| Mazak Five-axis CNC lathe(1 set) and Mitsubishi Five-axis CNC lathe(2 sets) | Mazak | VF-6/50TR | 7,500 rpm (47,124 rad.min-1) |
SPECIAL MACHINE FOR DRILLING AND TAPPING TEECH
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| Drilling device | Taiwan | M60(6 sets) | M1-M80 |
TESTING EQUIPMENT
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| CMM | Japan | 152212(1 set) | 1200*1000*600 |
| Quadratic device | Turnmaster | VMS-6040CNC(2 sets) | 600×400 |
GRINDING MACHINES
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| Precision grinder | Taiwan | T4(6 sets) | 1200*800*600 |
| 6030 Water grinder | Taiwan | 6030(2 sets) | 3000*1000*300 |
| 8040 Water grinder | Taiwan | 8040(2 sets) | 5000*1500*600 |
TESTING EQUIPMENT
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| Type lathe | Taiwan | 25 | 25 |
ALUMINIUM CASTING MACHINES
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| 400T Aluminum casting machine |
Taiwan | (400T 3 sets) | 400T |
| 230T Aluminum casting machine |
Taiwan | (230T 3 sets) | 230T |
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| C1N-60T(2 sets) | Japan | (The itinerary is 120) | 500×360×70 |
| C1N-S-80T(10 sets) | Japan | (The itinerary is 150) | 500×360×70 |
| C1N-V-80T(4 sets) | Japan | (The itinerary is 150) | 500×360×70 |
| C1N-V-110T(1 sets) | Japan | (The itinerary is 180) | 650×470×80 |
| C1N-160T(1 sets) | Japan | (The itinerary is 200) | 700×550×90 |
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| 400T Zinc Alloy Casting machine |
Taiwan | (400T 3 sets) | 400T |
| 100T Zinc Alloy Casting machine |
Taiwan | (100T 3 sets) | 100T |
| TYPE | MAKE | MODEL | SIZE |
|---|---|---|---|
| Rolling machine | Taiwan | (General purpose) | &2 sets |
| Edge punch machine | Taiwan | (General purpose) | &2 sets |
| Thread gauge | Taiwan | (General purpose) | &2 sets |
| Microscope | Taiwan | (General purpose) | &1sets |
| Rouhness machine | Taiwan | (General purpose) | &1sets |
